EasyManuals Logo

James ULTRA 9020 User Manual

James ULTRA 9020
20 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #18 background imageLoading...
Page #18 background image
16
CARE AND MAINTENANCE
Do not turn on the unit without water in the tank.
Even though the unit is designed with multiple protections, if it is turned on
for over 30 seconds without water in the tank, it may damage the unit or
severely reduce the life of the unit.
If heating over 3 minutes, it will damage the heater.
This unit is equipped with a thermal cuto. If the cleaning function
is turned on without water in the tank, the temperature will rise
continuously. The thermal cuto will be actuated after approximately
15 minutes respectively to ensure safety. The unit will be disabled until it
is repaired.
Do not run the unit for extended time or continuously.
The unit is designed with overheat protection. If the unit has been running
for 45 minutes, it is recommended to stop the unit for about 20 minutes to
prolong the life of the unit.
Do not keep water in the cleaning tank for a long time.
After cleaning is completed, open the drainage valve to drain the dirty
water. Clean and wipe the tank dry.
Do not spray water over the housing.
Use a towel to wipe the tank and the housing dry.
Do not expose the unit under direct sunshine for a long time.
Keep the unit in a dry, cool and ventilated area.
1
2
3
4
5

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the James ULTRA 9020 and is the answer not in the manual?

James ULTRA 9020 Specifications

General IconGeneral
BrandJames
ModelULTRA 9020
CategoryUltrasonic Jewelry Cleaner
LanguageEnglish

Related product manuals