Jameson JS-2012 - Blind Scan Functionality; Transponder Management

Blind Scan
First scan the band to get the transponders which can be locked. After gathering
all Transponders, Scan the transponders one by one to get the programs.
Channel Search
Scan the satellites or Transponders
according the configurations.
(Figure: channel scanning)
(Figure: Blind Scan TP) (Figure: Blind Scan Program)
(2).Transponder
Press GOTO to switch the list to show transponders of the focused satellite. Also
you can press GOTO to switch back to satellites' list.
Add transponder: Press Red to add a new transponder. It can't save an existing
TP under the same satellite.
(Figure: Transponder List) (Figure: add transponder)
-10-