Need help?Do you have a question about the JAMO DS1 and is the answer not in the manual?
General| Tweeter | 1 inch |
|---|---|
| Frequency response | 75 - 20000 Hz |
| Sensitivity | 86 dB |
| Power handling | 60 W |
| Speaker type | 2-way |
| Type | Bookshelf |
| Woofer size | 4 inches |
| Impedance | 6 Ohm |
Select 'Jamo DS1' from the device list in Bluetooth settings to begin pairing.
The device status changes to 'Connected' upon successful Bluetooth pairing.
Connect the USB cable to the speaker and power source, ensuring the protective flap is secured.
Connect an external audio device using a 3.5mm cable, ensuring the protective flap is closed.
Push the clamp into the speaker base, attach to bike, tighten screw, and adjust angle.
To Next Page
