CLAMP
The clamp is equipped with two cushions
with different thickness. You can choose
either cushion or put them together
according to the size of bike.
1. Push speaker clamp into the hole at the
bottom of speaker.
2. Fix the clamp on the bike and tighten
the screw. The speaker can be rotated 360º
and adjusted to your favorite angle.
3. Press the black strip to take off the
speaker.
BATTERY ALARM
Speaker beeps once per minute with less
than 20% battery. With less than 10%,
speaker shuts down automatically. It needs
2.5 - 3.5 hours to be fully charged.
PLAYBACK TIME
5-10 hours depending on the volume level.
To Next Page
Loading...
