JAMO MPA-101 - Technical Specifications

12
Specifications
Rated Power Output
Total Harmonic Distortion (THD)
Signal-to-Noise Ratio
Crossover Freq. Responce (-3dB):
Auto Turn On Sensitivity
Delay „OFF“ Time
Input Sensitivity Line In
Line Out Freq. Response (-3dB)
Input Impedance Line In
Max. noise+hum Vol Max
Clearance for ventilation - Back
Power Requirement
Weight
Shipping Weight
Dimentions:
Width
Height
Depth
Clearance for ventilation
Top
Back
50 Watts (Stereo) into 4✡ Load
100 Watts (BTL) into 8✡ Load
<0.1%
@ Min position 28-45Hz 40Hz/0dB ref
@ Max position 32-60Hz 40Hz/odB ref
11.0V +/-3 Full Range 1KHz
7.0V +/-2 Sub Input 50 Hz
15 - 20 minutes
Output 1 W/4✡ with:
Full Range 44mV +/-10 1KHz
Sub In 7mV +/-2 50Hz
20Hz +/-5K - 20 KHz +/-5K 1KHz/0dB ref
47K✡ +/-5
<3.0mV, Input Shorted
Minimum 2" (50mm)
115V 60Hz
7.8lbs (3.6 kgs)
8.6lbs (3.9kgs)
6.000“ (152.00mm)
3.125“ (79.00mm)
11.4375“ (290.00mm)
Minimum 3/8“ (10 mm)
Minimum 2“ (50 mm)