Need help?Do you have a question about the Jands Vista I3 and is the answer not in the manual?
General| Type | Lighting Console |
|---|---|
| Manufacturer | Jands |
| Model | Vista I3 |
| DMX Outputs | 4 |
| Number of Universes | Up to 4 |
| Software | Vista Software |
| Motorized Faders | No |
| Playback Faders | 10 |
| Touchscreen | Yes |
| MIDI Input/Output | Yes |
| Connectivity | Ethernet, USB |
| Ethernet Port | Yes |
| USB Port | Yes |
| Power Supply | Internal |
| Rack Mountable | No |
| Operating System | Windows |
| Display | LCD |
Covers initial setup procedures for the console hardware and connections.
Explains how to create new shows and open existing ones.
Guides on how to add fixtures to the patch using the Factory or User lists.
Guides on setting properties for fixtures using the Properties and Transforms tabs.
Explains how to connect universes to DMX outputs and external devices.
Explains the 'Store All' function for saving cue information and its features.
Describes how to open a cuelist in the editor for modification and management.
Explains how to use timecode (LTC, MTC) to trigger cuelists automatically.
Details the process of installing Vista V2 software on specific console models.
Guides on installing Vista V2 software on Windows PCs.
Details the initial setup for the tracking backup feature.
Describes the steps to initiate the tracking backup process.
Provides a step-by-step guide to creating custom fixture profiles.
Explains the 'DMX Chart' tab for DMX channel assignments and ranges.
Guides on how to retrieve crash report files from a console.
To Next Page
