- 21 -
Intel P43 Series User's Manual
BIOS SETUP UTILITY
Advanced
Advanced Chipset Settings ENABLE: Allow
remapping of overlapped
PCI memory above the
total physical memory.
DISABLE: Do not allow
remapping of memory.
←
Select Screen
↑↓
Select Item
+- Change Option
F1 General Help
F10 Save and Exit
ESC Exit
WARNING: Setting wrong values in below sections
may cause system to malfunction.
Memory Remap Feature [Enabled]
PCI MMIO Allocation: 4GB To 3072MB
Memory Hole [Disabled]
Initate Graphic Adapter [PEG/PCI]
PEG Port [Auto]
v02.61 (C)Copyright 1985-2006, American Megatrends, Inc.
• Adjacent Cache Line Prefetch
This should be enabled in order to enable or disable the Adjacent Cache Line Prefetch Disable
Feature.
• Max CPUID Value Limit
Setting this item to [Enabled] allows legacy operating systems to boot even without support
for CPUs with extended CPUID functions.
• CPU TM function
This functio enables the overheated CPU to throttle the clock speed to cool down.
• Execute-Disable Bit Capability
Allows you to enable or disable the No-Execution Page Protection Technology. Setting this
item to [Disable] forces the XD feature ag to always return to zero(0).
• Core Multi-Processing
When disabled, disable one execution core of each CPU die.
• PECI
When enabled, enables PECI interface.
• Intel(R) SpeedStep(tm) tech
When set to [Disabld], the CPU runs at its default speed. When set to [Enabled], the CPU
speed is controlled by the operating system.
・
Press <Esc> key to return to "Advanced" menu.
►
Chipset
The Chipset menu allows you to change the advanced chipset settings. Click <Enter> key to
enter its submenu.
• Memory Remap Feature
Allows you to enable or disabled the remapping of the overlapped PCI memory above the
total physical memory. Enable this option only when you install 64-bit operating system.
• Memory Hole
Allows you to set the memory hole mode.
• Initate Graphic Adapter
Allows you to decide which graphics controller to use as the primary boot device.
• PEG Port
Allow you to setup or disable PCI Erpress function.
・
Press <Esc> key to return to "Advanced" menu.
To Next Page
Loading...
