J&W Intel P43 Series - Page 23

- 22 -
Intel P43 Series User's Manual
BIOS SETUP UTILITY
Advanced
Onboard Device Configuration Allows BIOS to Enable
or Disable Floppy
Controller.
←
Select Screen
↑↓
Select Item
+- Change Option
F1 General Help
F10 Save and Exit
ESC Exit
OnBoard Floppy
Serial Port1 Address
Parallel Port Address
Parallel Port Mode
Parallel Port IRQ
Marvell PCIE LAN
LAN ROM Control
Audio Controller
USB Functions
USB Port Configure
USB 2.0 Controller
►
USB Device
Onboard IDE Control
SATA#1 Configuration
Configure SATA#1 as
SATA#2 Configuration
[Enabled]
[3F8/IRQ4]
[378]
[Normal]
[IRQ7]
[Enabled]
[Enabled]
[12 USB Ports]
[6X6 USB Ports]
[6X6 USB Ports]
[Enabled]
[Enabled]
[Enhanced]
[IDE]
[Enhanced]
v02.61 (C)Copyright 1985-2006, American Megatrends, Inc.
►
Onboard Device
Click <Enter> key to enter its submenu.
• OnBoard Floppy
Allows BIOS to Enable or Disable Floppy Controller.
• Serial Port1 Address
Allows BIOS to Select Serial Port base address
.
• Parallel Port Address
Allows BIOS to Select Parallel Port base address
.
• Parallel Port Mode
Allows BIOS to Select Parallel Port Mode
.
• Parallel Port IRQ
Allows BIOS to Select Parallel Port discontinuity
.
• Marvell PCIE LAN
This setting is used to enable or disable the onboard Marvell PCIE LAN.
• LAN ROM Controller
This item allows you to use the boot ROM to boot-up the system and access the local area
network directly.
• Audio Controller
This setting is used to enable or disable the onboard audio controller.
• USB Function
This project may use for to start or to close the USB function. In its under two options when
this project supposes is Enabled is only then effective .
• USB Port Congure
Option: 6x6 USB ports, 8x4 USB ports
• USB 2.0 Controller
Allows you to enable or disable the USB 2.0 controller.
• Onboard IDE Controller
Option: Enhanced, Disabled
• SATA#1 Conguration
Option: Disabled, Compatible, Enhanced
• Congure SATA#1 as
Option: IDE, RAID, AHCI