Need help?Do you have a question about the Jandy AquaPure Ei and is the answer not in the manual?
General| Pool Size | Up to 40, 000 gallons |
|---|---|
| Salinity Range | 2500 - 4500 ppm |
| Flow Rate | 20 GPM minimum |
| Display | Digital |
| Category | Salt Chlorine Generator |
| Type | Electronic Chlorine Generator |
Essential safety measures to reduce the risk of electrical shock during servicing.
Precautions to avoid equipment damage and injury from water pressure hazards.
How to set the Ei's interface mode for different pool controller types.
Specific wiring connections for Polaris, Jandy, and Pentair controllers.
Understanding the 'OUTPUT FAULT' message and its cause (service required).
Safety warnings and step-by-step instructions for cleaning the electrolytic cell.
Diagnosing and correcting issues causing insufficient chlorine production.
Corrective actions for consistently high chlorine output.
Resolving issues like blank display, 'No Flow' light, and salt warnings.
Diagnosing and addressing the 'Output Fault' error message.
Solutions for high/low salt levels and chlorine odor.
Addressing cloudy water, slimy walls, eye irritation, and scale formation on equipment.
To Next Page
