DRUM SANDER FOR WOODEN FLOORS
ED 98
PG. 4/19
INSTRUCTION MANUAL
CARRYING THE MACHINE
WARNING: Since the machine is heavy, ask for help in lifting it.
MOVEMENT WITH ONE PERSON
In order to make movement easier, the machine can be dismantled into two parts:
• suction tube and complete handgrip
• base with roller and motor
proceed as follows:
1. Make sure that the power supply cable is disconnected from the mains and the machine.
2. After having pushed forward lever
os. 1 fi
. A lift the tube
os. 3 and release bar
os. 4 from
the small roll pos. 2
3. Pull the plug pos. 6 out of the socket pos. 7 by rotating the plug anticlockwise
4. Loosen the handle pos. 5 fig. A, slip the tube off and take it to the work site
5. Lift up the base seizing in the front part the pin protecting the belt
os. 1 fi
. B and in the
inferior part the basement itself.
MOVEMENT WITH TWO PEOPLE
In order to move the machine with two people, proceed as follows:
1. One operator takes hold of the handle hand-grip.
2. The second person lifts the machine using the pin of the belt guard pos. 1 fig. B