EasyManua.ls Logo

Janus 250 Series - Page 75

Janus 250 Series
96 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
75
WARNING: If tire damage is suspected, such as after striking an
object or curb, have the tire and wheel inspected by a qualified
motorcycle mechanic as the damage may not be visible. Operation
of the motorcycle with damaged tires could lead to loss of control
and an accident.
WARNING: If tire damage is severe or if damage is suspected,
inspect the rim for dents or deformation and the spokes for
looseness or damage. Operation with damaged or defective rims,
spokes, or tires is dangerous and could lead to loss of control and
an accident.
TIRE BREAK-IN
When tires or inner tubes are replaced allow time for the tires and
inner tubes to “seat” properly. During this time, ride cautiously as an
incorrectly seated tire could cause instability, loss of control and an
accident.
Initially new tires will not produce the same handling characteristics as
the worn tires and the rider must allow adequate riding distance (100
miles) to become accustomed to the changed handling characteristics
of the new tires.
WARNING: New tires are slippery and may cause loss of control
and an accident. A break-in period of 100 miles is necessary to
establish normal traction. During this break-in period, avoid
sudden or hard braking, acceleration, cornering, and down-
shifting at high rpms.

Related product manuals