Jarol JAC200-004GB-4-2020 - User Manual

The User Manual of JAC200 Series General Frequency Converter
- 1 -
Preface
Firstly, thanks for your choice of JAC200 series frequency converter!
JAC200 series frequency converter, as a general current vector frequency converter with high
performance,dedicated to the induction motor drive.Drivers available for packaging, food, fans, pumps and
a variety of automated production equipment.
This manual introduces the functions and operation of JAC200 series frequency converter, involving in
product selection, parameter setting, operation, debugging, maintenance, inspection and so son. Please
understand this manual well before operation. The equipment supporting manufacturer should deliver the
equipment with this manual to the terminal user to provide references for subsequent operation.
Notes
♦ To introduce detailed parts of the product, the legend in this manual sometimes
shows the state of the product without outer cover or safety housing. When the product
is used, please make sure that the outer cover or housing has been installed well. The
machine is operated according to the manual.
♦ The legend in this manual is only for illustration and may be different from the real
product that you.
♦ We are committed to continuous improvement of the product, continuous upgrading
of product functions. There will not be any notice for any change in the data provided.
♦ If there is any failure in your operation, please contact any regional managers of the
Company in different regions or directly contact customer service center of the
company. Service hotline: 400-680-9991

Summary

Chapter 1 Safety Information and Precautions

1.1 Safety matters

Details safety precautions by service stage (before installation, during installation).

1.2 Precautions

Chapter 3 Mechanical and Electrical Installation

3.1 Mechanical installation

Covers installation conditions, space, and precautions.

3.2 Electrical installation

Chapter 4 Operation Display and Applications

4.1 Introduction of operation and display interface

4.2 Checking and modification of function code

Explains the menu structure for parameter setting and modification.

Chapter 5 Function Parameter List

5.1 Basic function parameter list

Chapter 6 Parameter Description

Group F0 Basic functional groups

Group F1 The first motor parameter

Group F2 Vector control parameter

Group F3 V;F Control parameter

Group F4 Input terminals

Group F6 Start-stop control

Group F9 Failure and protection

Details failure codes, protection settings, and handling measures.

Group FA Process control PID function

Explains PID control parameters for process automation.

Chapter 8 Maintenance and Failure Diagnosis

8.1 Daily maintenance for frequency converter

Covers daily inspection, cleaning, and component life.

8.3 Failure alarm and measures

Lists common failure codes, causes, and handling measures.

Appendix C: JAC200 Modbus Communication Protocol

Jarol JAC200-004GB-4-2020 Specifications