continued
For these reasons, we recommend the following:
1. Assign Z-Wave controlled appliances to device
numbers 10 – 18 on the JASCO remote. The
likelihood of unintentionally turning on the appliance
will be reduced signicantly because the “Shift”
button will need to be pressed before pressing
device numbers 10-18.
2. Z-Wave devices controlling appliances should be
removed from “All” control setting. Instructions on
how to do this are included in the manual for your
JASCO remote.
3. Do Not include Z-Wave devices in Groups or
Scenes if they control appliances.
4. Do Not use Z-Wave devices to control electric
heaters or any other appliances which may present
a hazardous condition due to unattended or
unintentional or automatic power on control.
5. Double check programs for accuracy before using
them.
NOT FOR USE WITH MEDICAL OR LIFE SUPPORT
EQUIPMENT
Z-Wave enabled devices should never be used to
supply power to or control the On/Off status of medical
and/or life support equipment!
To Next Page
Loading...