MAINTAINING YOUR VACCUMMAINTAINING YOUR VACUUM
WARNING:
TIP:
EMPTYING THE DUST CUP
•
To empty dust cup, first remove the handheld vacuum from the wand by pressing the Wand
Release buon and pulling up on the handheld vacuum. Posion dust cup over a bin, then
open the boom of the dust cup by pressing the Dust Cup release buon on the side.
CLEANING THE DUST CUP AND FILTERS
•
To clean the dust cup, remove the dust cup from handheld vacuum and rinse with water. Flush
the dirt off as needed. Once dust cup is completely dry, return it to handheld vacuum.
•
To clean the filter, remove the filter from dust cup as illustraon. Rinse with water. Once
completely dry, reinsert the filter to dust cup.
MAINTAINING THE BRUSH ROLLER / SOFT ROLLER
•
Release the brush roller/so roller by sliding the release buon, remove any string, hair, or
debris that may be wrapped around the brush roller/so roller by running scissors along the
guide on the roller.
•
Reinsert the brush roller/so roller to the floor head, unl the release buon click into place.
•
Wash the So Roller as needed, using only water. Air-dry completely for at least 24 hours
before returning it to the brush roller garage.
4
3
1 2
WARNING:
CAUTION:
IMPORTANT:
NOTE:
CHECKING FOR BLOCKAGES: Handheld, Wand,
and Floor Head
•
Turn off vacuum and remove the baery.
•
Remove the wand from the handheld vacuum and check all intake openings.
•
Remove the floor head from the wand and check the wand for blockages.
12 www.jashen-tech.com
support@jashen-tech.com 13
To Next Page
Loading...
Need help?
General
