Flip the Jaspr Medical system
upside down. Twist the cap
counterclockwise to take it off
2.
*WARNING* Remove plastic
wrap from the lter. Then slide
the lter into the new Jaspr
Medical system.
3.
Once the lter is inside the
system, place the cap back on
and twist it clockwise.
4.
Flip your device upright. Then
connect your power cord to the
system and plug it into an outlet.
5.
Turn on your Jaspr Medical
system and you’re ready to go! :)
6.
Unpack the air purier and
take out the power cor
1.
Installation
To Next Page
Loading...