Jata JVAC2001 - Assembling Instructions; Maintenance and Cleaning; Environment Protection

8
9
• Always place it on a at and stable surface.
• Do not use outdoors.
• Do not put the ngers or other objects into the slits to
prevent the engine block.
• Manipulation or replacement of any component must be
performed by an authorized service centre.
• If the power cord is damaged, it must be replaced by the
manufacturer or by its after-sales service or similar qualied
personnel in order to avoid a danger.
ASSEMBLING INSTRUCTIONS
• Insert the 4 wheels (2) in the base of main body (1).
INSTRUCTIONS OF USE
• Remember the appliance always must be placed on a at and stable surface.
• If you want to humidify the environment, pour cold water into the tank (3). Two bottles of ice are included,
use them if you want to chill, previously introducing them in the freezer. Pay attention to the MIN and
MAX indications of the tank and keep the level between them.
• Plug the appliance into the mains.
CONTROL PANEL
(A). On / o button. Switch on the fan by pushing the knob.
(B). Speed regulator. Chose the desired speed (min-med-max).
(C). Mode: Press this knob to select the dierent programs:
- Normal: constant speed.
- Natural: to simulate a natural breeze.
- Night: natural breeze for a nocturnal using.
(D). Timer. To program push the timer knob consecutively till selecting the desired period of time
(max. 7 hours).
(E). Automatic oscillation. To oscillate push the oscillation button.
(F). Cooler: Press this button, the water pump takes the water from the tank, pouring it over the lter (6).
The expelled air will be cooler and more humid.
• When pressing the knobs, a light will show the selected program.
• You can control the fan with the remote control (5), maximum functioning distance 8 m. The remote
control works with 1 CR2025 battery.
MAINTENANCE AND CLEANING
• Before you proceed to cleaning, make sure the appliance is unplugged from the mains.
• Clean with a slightly damp cloth.
• It is important to keep the frontal grid and the air inlet lter (6) clean of dust that it can be adhered. It is
advisable to clean the lter once a month.
• Do not use abrasive or chemical products, such as metallic scourers, which may deteriorate the surfaces
of the appliance.
ENVIRONMENT PROTECTION
• Dispose the appliance according to the local garbage regulations.
• Never throw it away to the rubbish. So, you will help to the improvement of the environment.