EasyManua.ls Logo

Java wsd18 - Appliance Power On and Warm-up; Brewing Coffee with Powder

Java wsd18
18 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
7
4.1 Turn on the appliance and warm up
Plug the appliance to the electrical outlet, switch the Power Switch① to on position,
press the On/Off key④ to turn on the appliance, the red light on the On/Off key twinkles.
When the red light becomes solid red, the appliance is ready for making coffee.
4.2 How to use coffee powder to make coffee
(1) When the appliance is ready, place the Powder Filter
11
into the Filter Holder⑦ and
to make sure it is in the lowest bottom.
(2) Fill proper amount of coffee powder into the Powder Filter
11
. (Do not fill too full,
use the Powder Scoop
13
to scrape the overfill, make sure the Filter Holder can
properly be blocked to the Brew Head⑥, cause no clogging.)
(3) Tamp and compress coffee powder in the brewing basket using Powder Scoop
13
, thus
increase the utilization rate of coffee powder and strengthen the aroma of the coffee.
(4) Position the Filter Holder⑦ underneath the Brew Head⑥, then slowly turn the handle

Related product manuals