Java wsd18 - Brewing a Cup of Coffee

6
(1) Before removing any of the parts and accessories, make sure the Control Knob③ on the
side of unit is turned to the off position(“O” position), Steam Key⑤ (green) is off,
the coffee maker is ready.
(2) Do not remove the Filter Holder⑦ at any time during the brewing process.
(3) Do not touch the metal part of Filter Holder⑦ when taking off it, after brewing, the
metal part may still be very hot. When taking off the Filter Holder⑦, be careful there
may be hot water floating on the top of the Filter⑩/
○
11
/○
12
, try to make them drip to
drip tray. If not drip any more, take out the Filter Holder⑦.
(4) If coffee does not drip out from the Filter Holder⑦, then the Filter⑩/
○
11
/○
12
is blocked.
The blockage may be caused by the coffee being too finely ground. Turn off the appliance
and allow it to cool down, wash the Filter⑩/
○
11
/○
12
and Filter Holder⑦.
(5) In order for your unit to work properly time after time, clean the frothing tip and
tube after each use.
4. Brewing a cup of coffee