Jay Tech Cameras JTC 19C - BASIC OPERATIONS; Program Selection and Volume Control; Source, Picture, and Sound Settings; Timer and Video Size Settings

15
- Press POWER button on unit or remote control to power ON the unit (indicator will glow
blue); press it again to power OFF (standby mode) the unit (indicator will glow red).
- Press SOURCE button on unit top or remote control to set the unit in DTV or TV mode.
SELECT DESIRED PROGRAM
- Press CH+ button to play next channel.
- Press CH- button to play previous channel.
- Press number buttons on remote control directly to select wanted program.
NOTE: Press -/-- button repeatedly to switch digit.
VOLUME CONTROL
- Press VOL+ or VOL- to adjust the level of current volume.
- Available range: 0-100.
MUTE CONTROL
Press MUTE button to mute the sound, press it again to turn on the sound.
SOURCE SETTING
- Press SOURCE button on unit or remote control to display the sources list.
- Press UP or DOWN navigation button to select desired input source, and then press OK
button to confirm selection.
- Available options: DTV, ATV, AV, SCART, YPbPr, HDMI, PC, MEDIA.
PICTURE MODE
- Press P-MODE button on remote control repeatedly to select desired PICTURE mode
directly.
- Available options: Standard, Mild, User, Dynamic.
SOUND MODE
- Press S-MODE button on remote control repeatedly to select SOUND mode directly.
- Available options: Standard, Movie, Music, Speech, User.
SLEEP TIME SETTING
- Press SLEEP button on remote control repeatedly to select SLEEP TIMER directly.
- Available options: Off, 10min, 20min, 30min, 60min, 90min, 120min, 180min, 240min.
VIDEO SIZE SETTING
- Press ASPECT button on remote control repeatedly to select VIDEO SIZE directly.
- Available options: Auto, 4:3, 16:9, Zoom1, Zoom2.
BASIC OPERATIONS