Jaycar Electronics qv-3146 - Remote FTP and Alarm Settings; 6.3.5 Remote Alarm Parameter Configuration

USER MANUAL
39
6.3.5 Alarm
Alarm setting includes Motion Detection and I/O Alarm Parameters.
1. Motion Detection
Configure Sensitivity, Alarm out, Alarm Record and Alarm Capture, etc. Detailed setting should be
consistent with DVR local setting (See Picture 6-24).
Picture 6-24
2. I/O Alarm
Set parameters for I/O Alarm, Alarm Out, Alarm Record, Send Email, etc. Detailed setting
should be consistent with DVR local setting (See Picture 6-25).
Picture 6-25