JAYCO TOWABLE SECTION 4 - TOWING & SET-UP
PNCFW 4-15
FIFTH WHEEL SET UP
1. Pull into the site, and park the RV where you want it.
2. Block the wheels securely to prevent the RV from moving.
3. Drop the landing gear (important!) Refer to the operator’s manual for proper
operation.
4. Disconnect the wire harness/connector plug and breakaway switch lanyard.
5. Drop the truck tailgate (unless you have a tailgate specially designed to
accommodate a fifth-wheel hitch).
6. Gently put your truck into reverse (don’t give it any fuel/acceleration).
This effectively moves the kingpin off the locking bar that will allow you to
disengage it.
7. Step on brake and apply parking brake.
8. Disengage the locking bar and unhitch.
9. Drive away.
10. Adjust the fifth-wheel height for proper front to back leveling of the RV.
To Next Page
Loading...
