26
The upper portion of this yellow label is
federally required and indicates the total combined
weight value of occupants and cargo that may be
placed in or on your motor home as it was manufac-
tured and weighed before leaving the factory.
This label also indicates the number of safety seat
belts that have been installed at the factory. Additions
or other changes made to the motor home after it
left the factory will aect (reduce) the OCCC.
The lower portion of the label is provided volun-
tarily and indicates the weight value of the motor
home as it was manufactured and weighed before
leaving the factory. This label also indicates the
GCWR of the completed motor home.
is required by the
government to verify the RV complies with all motor
vehicle standards for Canada and the United States.
It includes the following information: Manufacturer
name, VIN, GVWR, GAWR (front/rear), tire and rim
sizes and cold tire ination pressures.
is located
on the rear bumper above the hitch receiver. Be sure to
read and follow the guidelines and information stated
on this label. Refer to the Chassis Guide for additional
information.
Consult a hitch specialist or your dealer for assistance when pre-
paring your motor home for towing a vehicle or trailer.
To Next Page
Loading...
