87
RV Auto Leveling System Power Jacks and Stabilizers
Interior and Exterior Lighting RV Slide out rooms
Power awnings HVAC thermostat
Gas and Electric water heaters Water tank levels (Blk, Gry, Fresh)
Water Pump Generator
The following buttons can be found on the display control unit mounted inside the RV.
Refer to the photo above.
Allows you to move from page to page (e.g. Tanks page to Water page)
Allows navigation between items within a page. (e.g. in the Water page move from Pump
to Elec Water Heater.
Functions for these buttons change depending on the selected menu item. These functions
will be displayed on the screen (e.g. OK, RET, EXT)
These buttons across the bottom of the display turn on lights, water pumps, and main A/C.
First button turns on/o all interior lights (long press sets intensity to 100%)
Second button turns on/o all exterior lights.
Third button turns on/o all interior and exterior lights.
Fourth button turns on/o the water pump.
Fifth button brings up the A/C control screen on the display.
To operate the system with your smartphone, you must download the JayCommand App,
and install it. Next you need to pair the Smartphone with the NODE. The NODE can be
paired to a maximum of 4 devices.
Launch the app on your phone.
Choose your device on the phone (BMPro Mini)
Go to the wall display control screen.
Use the Page Navigation button to go to the Settings page.
Select Pair Device from the menu.
Press the OK function button when the Pair Device is highlighted.
This starts the pairing process.
When pairing is successful you will be taken to the APP homescreen on your
smartphone and the Bluetooth icon will be visible.
Your device is now connected.
There are 6 screens (or pages) that are available on the display screen:
which displays levels of fresh, black, and gray tanks. All tanks will appear
regardless of whether all are installed.
shows the water pump, Water Heater Elec, and Water Heater Gas.
shows all of the slideouts and awnings.
operates the AC temperature in the RV.
To Next Page
Loading...
