142
The dinette is designed to seat up to four adults. Depending on your model, there may be a
storage area in the dinette bench. To access this storage, remove all the cushions and lift up
on the bottom seat support.
.
The dinette seats that are secured with screws contain factory installed equipment and should
only be accessed by a qualied service technician.
Your motorhome may be equipped with one of the following dinette styles that can be con-
verted into a bed.
Remove all the cushions from the booth dinette. Lift up the tabletop and remove the detach-
able table legs. Place the tabletop on the ledges provided between the booth dinette benches.
Lay the seat back cushions against the back of the dinette bench. Lay the dinette seat bottom
cushions in between the seat back cushions. The area where the cushions meet should be
slightly raised. Push the raised cushion ends down gently as the cushions are designed to t
snugly. Reverse this process when converting back to the booth dinette.
Remove all the cushions from the dinette. Locate the locking mechanism rod under the
table top. This locking mechanism is designed to keep the table from collapsing into the bed
conguration. Turn this rod so it moves out of the channel and points down toward the oor.
Push the dinette table down toward the oor to form the platform for the bed. Arrange the
cushions to form a mattress for sleeping. To convert back to a dinette, remove the cushions,
pull the table back up as high as it will go, and turn the rod underneath back to the locked
position.
To Next Page
Loading...
