34
The following labels are located on the inward-facing surface of the main entry door of the
motorhome and on the lower sidewall left of the driver’s seat
The upper portion of this yellow label is
federally required and indicates the total combined
weight value of occupants and cargo that may be
placed in or on your motorhome as it was manufac-
tured and weighed before leaving the factory.
This label also indicates the number of safety seat
belts that have been installed at the factory. Addi-
tions or other changes made to the motorhome after it
left the factory will aect (reduce) the OCCC.
The lower portion of the label is provided volun-
tarily and indicates the weight value of the mo-
torhome as it was manufactured and weighed before
leaving the factory. This label also indicates the
GCWR of the completed motorhome.
is required by
the government to verify the RV complies with all
motor vehicle standards for Canada and the United
States. It includes the following information: Manu-
facturer name, VIN, GVWR, GAWR (front/rear), tire
and rim sizes and cold tire ination pressures.
is located
on the rear bumper above the hitch receiver. Be sure to
read and follow the guidelines and information stated
on this label. Refer to the Chassis Guide for additional
information.
Consult a hitch specialist or your dealer for assistance when pre-
paring your motorhome for towing a vehicle or trailer.
To Next Page
Loading...
