20
The upper portion of this yellow label is federally re-
quired and indicates the total combined weight value
of occupants and cargo that may be placed in or on
your motor home as it was manufactured and weighed
before leaving the factory.This label also indicates the
number of safety seat belts that have been installed at
the factory. Additions or other changes made to the
motor home after it left the factory will aect (reduce)
the OCCC.
The lower portion of the label is provided voluntarily
and indicates the weight value of the motor home as
it was manufactured and weighed before leaving the
factory. This label also indicates the GCWR of the
completed motor home.
is locat-
ed on the rear bumper above the hitch receiver. Be
sure to read and follow the guidelines and information
stated on this label. Refer to the Chassis Guide for additional information.
Consult a hitch specialist or your dealer for assistance when pre-
paring your motor home for towing a vehicle or trailer.
Required by the government to verify the RV
complies with all motor vehicle standards for
Canada and the United States. It includes the
following information: Manufacturer name,
VIN and the date.
provides informa-
tion on the tire sizes, cold tire ination pres-
sures, the VIN and maximum cargo capacity.
The maximum cargo capacity listed on the la-
bel does not include the weight of a full load
of water.
To Next Page
Loading...
Need help?
General
