85
To remove the table, rmly grasp both sides of the tabletop and lift up until the table legs are
no longer seated in the tabletop base. It may be easier to have (2) people to remove the table
(someone at each end). Set the table aside for storage, or if you are setting up the sleeping
area, the tabletop can be placed on the bedrails.
Firmly grasp the table leg collar at the oor, and twist counter-clockwise to loosen it. Twist
the leg counter-clockwise until you feel resistance. Continue to turn the leg counter-clock-
wise until you feel a click and the blades match up with the hole. Pull up on the leg to
remove it from the oor collar. Store the table legs in the passenger side sofa base.
Place the table leg on the base, lining up the blade holes with
the blade. Push the leg down and twist the table leg clockwise
until you feel some resistance. Continue to turn the table leg
clockwise until it clicks into place. Twist the collar at the
base to tighten.
Firmly grasp the tabletop on both sides and gently set it down
on the table legs lining up the leg with the base. It may be
easier to have (2) people set the tabletop on the legs. Push
down lightly on the tabletop to endure that it is rmly in place.
Remove the table. Store the table legs in the passenger side sofa base.
Locate the bedrails in the driver side sofa base. Pull the rail(s) from the sofa base and place
the end in the bedrail support on the passenger side sofa base. The sofa tabletop may be
placed on the center bedrails for storage.
With the bedrails rmly In place, unfold the sofa cushions extending the sofa backs across
the bedrails.
Make sure the bedrails are securely seated in the bedrail support before and
after adding the tabletop.
Do not sit on or lean on the table. It is intended for use as a table only
To Next Page
Loading...
Need help?
General
