Force pair mode can be good to use if users wish to con-
nect the M6 to a 2nd device and not wish to switch BT off
on the first device connected.
Clear pair list can be used to solve pairing/connecting
problems.
m-Six uses 2 microphones and noise cancellation algo-
rithm. One picks up the voice and the other picks up the
environment and deducts the environment noise from the
voice mic to filter the call speech sound.
Electronics.
m-Six Wireless
Speakers - m-Six use the same 6mm
dynamic speaker as a-Six but with slight
different tuning due to different cavity.
Microphones - The microphones are some
of the smallest on the market and offer
excellent audio performance. We use two
identical bottom port mics for the m-Six
and its cVc feature.
To Next Page
Loading...
