ENGLISH - 76 - ENGLISH
Microphone
LED Indication
(Will be RED
during charging)
POWER
ON/OFF
VOICE CALLS
PAIRING /
CONNECTION
Press and hold power button for 2 seconds to power ON
your s-Go Three speaker. You will hear a welcome tone once
powered ON. The speaker will automatically try to connect to
the last device used (if any). Press again for 2 seconds and the
speaker will power OFF.
JAYS s-Go Three has built-in mic. for handsfree operation during
calls. Calls can be accepted from your device, or s-Go Three by
pressing Power button once.
If you want to pair a new device with your s-Go Three then the
speaker must be put into pairing mode rst.
When the speaker is powered ON it will automatically be in both
Pairing, and Connection mode for 5 mins. In this period, you are
able to pair new devices or re-connect already paired devices.
If the speaker is already powered ON you can double press the
power button for enabling Pairing Mode again.
When the speaker enter pairing mode you will also hear the
message “Waiting for connection” and the speaker will now be
visible on your Bluetooth device list. When successfully paired/
connected, the speaker will reply “Time to play”.
Power button
Volume buttons
Micro USB
for charging only
CONTROLLING YOUR
NEW JAYS S-GO THREE
HOW TO USE YOUR
NEW JAYS S-GO THREE
To Next Page
Loading...
Need help?
General
Weight and Dimensions
