After having saved the photos you can empty the memory of your camera (delete
all photos which are saved in the memory) and start taking pictures again.
3.4 Uploading a photo with a resolution of 1.3M pixels
A: Click on <Download photos>, select “Edit image” button;
B : Select the “Pixel Up” Option (You can select “High Quality Mode” to get better image),
then select the “OK” button to ESC
C: Downloaded photos and the photos originally taken in VGA format are now
saved to your computer in 1.3 M pixels.
4. Problem-solving
Here are the most commonly encountered problems:
When you press the POWER button, the camera does not turn on:
Solution: Battery level is low. You should change the batteries.
The camera cannot transfer photos on to the computer or it says there are no
photos:
Solution: Restart the computer and reconnect the camera.
Check in the control panel/system settings.
If the camera device driver is not present reinstall it again
To Next Page
Loading...
