Need help?Do you have a question about the JBL 308P MkII and is the answer not in the manual?
General| Speaker type | 2-way |
|---|---|
| Driver diameter | 203 mm |
| Number of drivers | 2 |
| Speaker placement | - |
| Audio output channels | - channels |
| Sensitivity | 92 dB |
| Frequency range | 37 - 24000 Hz |
| RMS rated power | - W |
| Crossover frequency | 1800 Hz |
| Signal-to-Noise Ratio (SNR) | 75 dB |
| Total Harmonic Distortion (THD) | 0.2 % |
| Product color | Black |
| Volume control | Rotary |
| Housing material | MDF |
| Amplifier class | D |
| Amplifier output power | 56 W |
| AC (power) in | Yes |
| Connectivity technology | Wired |
| XLR/TRS in combo port | 1 |
| AC input voltage | 100 - 240 V |
| Power source type | AC |
| AC input frequency | 50 / 60 Hz |
| Package type | Box |
| Package depth | 372 mm |
| Package width | 326 mm |
| Package height | 491 mm |
| Package weight | 9400 g |
| Quantity per pack | 1 pc(s) |
Weight and Dimensions| Depth | 308 mm |
|---|---|
| Width | 254 mm |
| Height | 419 mm |
| Weight | 8100 g |
Essential guidelines for safe operation, installation, and handling of the JBL 3 Series equipment.
Information on electrostatic discharge, electromagnetic compatibility, EU directives, and WEEE disposal.
List of included items and detailed procedures for unpacking studio monitors and the subwoofer.
Instructions for connecting audio sources, subwoofer, and power to the JBL 3 Series system.
Steps to power on the system and achieve initial sound output for testing.
Guidance on setting subwoofer volume, optimizing placement, and adjusting polarity for best sound.
Solutions for common audio problems like no sound, distorted signal, or low volume levels.
Troubleshooting steps for excessive or boomy bass response from monitors or the subwoofer.
To Next Page
