Need help?Do you have a question about the JBL GT-BassPro12 and is the answer not in the manual?
General| Product type | Pre-loaded subwoofer |
|---|---|
| Enclosure type | Enclosed |
| Subwoofer type | Passive subwoofer |
| Number of drivers | 1 |
| Subwoofer peak power | 450 W |
| Subwoofer sensitivity | 12 dB |
| Subwoofer driver diameter | 305 mm |
| Subwoofer frequency range | 35 - 120 Hz |
| Subwoofer crossover frequencies | 70 - 120 Hz |
| Subwoofer driver diameter (imperial) | 12 \ |
| Housing material | - |
Weight and Dimensions| Width | 369 mm |
|---|---|
| Height | 570 mm |
| Weight | 17500 g |
Essential safety precautions and tips for installing the subwoofer. Always wear protective eyewear and disconnect the battery.
Guidance on selecting a suitable location for mounting the subwoofer in the vehicle, ensuring it doesn't interfere with cargo.
Instructions on how to mount the remote level control under the dashboard or in the console for easy access.
Details on connecting the subwoofer to the vehicle's audio system, including various input and output connectors.
Connect the subwoofer using stereo RCA audio cables to the head unit's line-level outputs.
Connect the subwoofer to the head unit's line-level subwoofer output using a single RCA audio cable.
Connect the subwoofer using speaker wire to the car audio system's speaker outputs if no line-level outputs are available.
Details on connecting the +12V and GND terminals using appropriate gauge wire and installing a fuse holder.
Explains how to connect the Remote (REM) connector for turn-on, typically from the head unit's preamp output.
Explanation of the subwoofer's control panel features, including Power indicator, Auto Turn-On, Protect indicator, Phase, Level, Low Pass, and Bass Boost controls.
Step-by-step guide to setting the head unit and subwoofer controls for optimal sound quality and performance.
Guidance on setting the phase switch to 0° or 180° to optimize upper bass response based on listening tests.
To Next Page
