Do you have a question about the JBL GT1200 and is the answer not in the manual?
Details on diameter, sensitivity, power handling, frequency response, nominal impedance, and voice-coil diameter.
Provides mounting depth, cutout diameter, and outer diameter measurements for the speaker.
Graphical representation of the speaker's impedance across frequency.
Shows frequency response in both In-Car and Out-Of-Car conditions.
Illustrates transducer excursion and group delay at 75W.
Lists parameters like REVC, Levc, BL, VAS, CMS, MMS, QMS, QES, QTS.
Details voice coil height, magnetic gap height, and maximum excursion (XMAX).
Recommended sealed enclosure volume and construction details.
Recommended vented enclosure volume, port dimensions, and tuning frequency.
Frequency response for the speaker in a sealed enclosure.
Excursion and group delay for the speaker in a sealed enclosure at 250W.
Frequency response for the speaker in a vented enclosure.
Excursion and group delay for the speaker in a vented enclosure at 275W.
Details on sealed bandpass enclosure volume and port tuning.
Frequency response for the speaker in a sealed bandpass enclosure.
Excursion and group delay for the speaker in a sealed bandpass enclosure at 200W.