Do you have a question about the JBL GTO1204D and is the answer not in the manual?
Specifies the diameter of the speaker driver.
Measures speaker's sound output at a given power level.
Indicates the continuous and peak power capacity.
Defines the range of audible frequencies the speaker reproduces.
Specifies the speaker's electrical impedance.
Measures the diameter of the speaker's voice coil.
Details the physical size and mounting requirements.
DC resistance of the voice coil.
Voice coil inductance at 1 kHz.
Effective radiating area of the driver cone.
Motor force factor.
Equivalent volume of air.
Compliance of the suspension system.
Moving mass including air load.
Moving mass of the diaphragm.
Free-air resonance frequency.
Mechanical Q factor.
Electrical Q factor.
Total Q factor.
Height of the magnetic gap.
Height of the voice coil.
Maximum voice coil excursion.
Recommended sealed enclosure volume for optimal performance.
Graph showing speaker's frequency response in a sealed enclosure.
Graph illustrating cone excursion at 300W in a sealed enclosure.
Details for a vented enclosure including port dimensions.
Graph showing speaker's frequency response in a vented enclosure.
Graph illustrating cone excursion at 300W in a vented enclosure.
Details for a bandpass enclosure with two ports.
Graph showing speaker's frequency response in a bandpass enclosure.
Graph illustrating cone excursion at 300W in a bandpass enclosure.