Need help?Do you have a question about the JBL GTO1202D and is the answer not in the manual?
Physical dimensions of the driver, including mounting and cutout, and recommended sealed box volume.
DC resistance, inductance, radiating area, and motor force factor (BL) of the voice coil.
Equivalent air volume (VAS), suspension compliance (CMS), and moving mass (MMS/MMD).
Free-air resonance (Fs), mechanical Q (QMS), electrical Q (QES), and total Q (QTS).
Magnetic gap height, voice coil height, and maximum excursion (XMAX).
Frequency response curve for the driver in a sealed enclosure at 2.83V.
Cone excursion graph for the driver in a sealed enclosure at 300W.
Recommended vented enclosure volume with driver and port displacement.
Frequency response curve for the driver in a vented enclosure at 2.83V.
Cone excursion graph for the driver in a vented enclosure at 300W.
Recommended bandpass enclosure volumes (front and rear) with driver/port displacement.
Frequency response curve for the driver in a bandpass enclosure at 2.83V.
Cone excursion graph for the driver in a bandpass enclosure at 300W.
To Next Page
General
