Do you have a question about the JBL GTO1502D and is the answer not in the manual?
The speaker's diameter is 15 inches (381 mm).
Sensitivity rating is 93 dB at 2.83V and 1 meter.
Handles 300 WRMS and 1200 W PEAK power.
Frequency response range is 23 Hz to 400 Hz.
The speaker has a nominal impedance of 1 or 4 OHMS.
The voice-coil diameter is 2.0 inches (51.0 mm).
Provides mounting depth, cutout diameter, and outer diameter.
Voice coil DC resistance (REVC) is 0.96 OHMS.
Voice coil inductance (LEVC) at 1 kHz is 0.50 MH.
Driver radiating area (SD) is 132.53 SQ. IN. (855.00 SQ. M).
Motor force factor (BL) is 8.20 TM.
Compliance volume (VAS) is 6.04 FT³ (171.00 LITERS).
Suspension compliance (CMS) is 164.70 UM/N.
Moving mass with air load (MMS) is 246.90 GRAMS.
Moving mass of diaphragm (MMD) is 232.50 GRAMS.
Free-air resonance frequency (Fs) is 25.00 Hz.
Mechanical Q factor (QMS) is 6.08.
Electrical Q factor (QES) is 0.55.
Total Q factor (QTS) is 0.51.
Magnetic gap height (HAG) is 3/8 IN. (9.00 MM).
Voice-coil height (Hvc) is 1.00 IN. (26 MM).
Maximum excursion (XMAX) is 5/16 IN. (8.50 MM).
Recommended sealed box volume with driver displacement is 1.5 ft³ (42.48 liters).
Frequency response graph for sealed enclosures at 2.83V.
Cone excursion graph for sealed enclosures at 300W.
Recommended vented box volume with driver/port displacement is 3.50 ft³ (99.11 liters).
Frequency response graph for vented enclosures at 2.83V.
Cone excursion graph for vented enclosures at 300W.
Recommended bandpass box volume with driver/port displacement is 2.00 ft³ (56.63 liters) for front and rear chambers.
Frequency response graph for bandpass enclosures at 2.83V.
Cone excursion graph for bandpass enclosures at 300W.