Do you have a question about the JBL GTO 1002D and is the answer not in the manual?
Type | Subwoofer |
---|---|
Impedance | 2 ohms |
Sensitivity | 93 dB |
Power Handling (RMS) | 300 watts |
Power Handling (Peak) | 1200W |
Key dimensions, sensitivity, power handling, nominal impedance, and voice-coil diameter.
Recommended sealed box volume and frequency response curve.
Free-air resonance (Fs), mechanical (Qms), electrical (Qes), and total (Qts) Q factors.
Moving mass (Mms), compliance volume (Vas), and suspension compliance (CMS).
Voice coil height (Hvc), magnetic gap height (Hag), and maximum excursion (Xmax).
Recommended vented box volume and port tuning frequency.
Recommended bandpass box volumes and port tuning frequencies.
Frequency response curves for vented and bandpass enclosures.
Cone excursion levels for vented and bandpass enclosures at 250W.