Need help?Do you have a question about the JBL Loud + Clear LC-A504 and is the answer not in the manual?
Power Output| power_output_4_ohms | 50W x 2 |
|---|---|
| power_output_2_ohms | 65W x 2 |
| power_output_4_ohms_bridged | 130W x 1 |
Audio Performance| frequency_response | 20Hz – 40kHz |
|---|---|
| input_sensitivity | 250mV – 4V |
| thd_noise | .10% |
| signal_to_noise_ratio | >90dB |
Power and Dimensions| maximum_current_draw | 20A |
|---|---|
| dimensions_h_w_d | 2-5/16" x 8-5/16" x 7-9/16" |
| dimensions_h_w_d_mm | 58mm x 217mm x 191mm |
Power Output| power_output_4_ohms | 75W x 2 |
|---|---|
| power_output_2_ohms | 90W x 2 |
| power_output_4_ohms_bridged | 180W x 1 |
Audio Performance| frequency_response | 20Hz – 40kHz |
|---|---|
| input_sensitivity | 250mV – 4V |
| thd_noise | .10% |
| signal_to_noise_ratio | 90dB |
Power and Dimensions| maximum_current_draw | 26A |
|---|---|
| dimensions_h_w_d | 2-5/16" x 8-5/16" x 12-1/2" |
| dimensions_h_w_d_mm | 58mm x 217mm x 317mm |
Power Output| power_output_4_ohms | 30W x 4 |
|---|---|
| power_output_2_ohms | 37.5W x 4 |
| power_output_4_ohms_bridged | 75W x 2 |
Audio Performance| frequency_response | 20Hz – 40kHz |
|---|---|
| input_sensitivity | 250mV – 4V |
| thd_noise | .10% |
| signal_to_noise_ratio | 90dB |
Power and Dimensions| maximum_current_draw | 23A |
|---|---|
| dimensions_h_w_d | 2-5/16" x 8-5/16" x 11-5/8" |
| dimensions_h_w_d_mm | 58mm x 217mm x 297mm |
Power Output| power_output_4_ohms | 50W x 4 |
|---|---|
| power_output_2_ohms | 62.5W x 4 |
| power_output_4_ohms_bridged | 125W x 2 |
Audio Performance| frequency_response | 20Hz – 40kHz |
|---|---|
| input_sensitivity | 250mV – 4V |
| thd_noise | .10% |
| signal_to_noise_ratio | 90dB |
Power and Dimensions| maximum_current_draw | 42A |
|---|---|
| dimensions_h_w_d | 2-5/16" x 8-5/16" x 14-1/16" |
| dimensions_h_w_d_mm | 58mm x 217mm x 357mm |
Essential safety measures including eye protection, disconnecting power, and checking clearances before drilling.
Ensures proper airflow for cooling and secure mounting, avoiding damage from passengers or cargo.
Instructions for connecting power, remote turn-on, and ground wires with appropriate gauge and fuse.
Details on connecting speakers for stereo or bridged modes, specifying minimum impedance requirements.
Information on passive crossover components (inductors and capacitors) for Tri-Mode operation.
Guide for connecting RCA cables or using speaker-level-to-line-level adapters for audio input.
Details the selectable 12dB/oct HPF, LPF, or defeatable crossover and frequency range.
Explains how to adjust the input sensitivity for optimal undistorted sound output.
To Next Page
