JBL LX Series - Page 4

Generai Care
JBL LX Series loudspeaker systems
are constructed of high quality particle
board, superior to solid wood in its
acoustic properties. For maximum
strength and resistance from vibration,
all panels are cut from 3/4” stock and
are rigidly braced. Enclosure surfaces
are finished in high quality laminates.
Occasional dusting with a clean, soft
cloth will maintain the original beauty
of the finish. Furniture waxes, polishes,
or cleaners are not recommended.
The grille may be gently vacuumed,
and stains can be removed with an
aerosol cleaner, following the
manufacturer’s instructions. Never
use any solvents to clean any part of
the system.
Service should your loudspeaker system ever
need service, return it to the JBL
dealer from whom it was purchased.
3