To Next Page

To Previous Page

jbl on stage micro safety instructions

Please read the following precautions before use:

• Read instructions. All safety and operating instructions should be read thoroughly before attempting to operate this audio system.

• Retain instructions for future reference.

• Heed warnings. All warnings on this audio system and in the operating instructions should be adhered to.

• Follow instructions. All operating and use instructions should be followed.

• TO PREVENT THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE THE COVER (OR BACK). THERE ARE NO USER-SERVICEABLE PARTS INSIDE THIS UNIT.

PLEASE REFER SERVICING TO QUALIFIED JBL SERVICE PERSONNEL.

• Do not expose the speakers to liquid or solvent.

• Never remove grille covers in order to service the speaker system. The speaker system does not contain any user-serviceable parts. Refer all servicing to the JBL

Technical Support Group.

• Do not expose the speaker system to temperature or humidity extremes, direct sunlight, excessive dust or vibrations.

• Place the speaker system on a stable, level surface. Do not drop, apply excessive force to the controls or put heavy objects on top of the speaker.

• If cleaning is required, use a soft, dry cloth. If necessary, use a damp cloth without any solvents.

• In order to protect the speaker system, avoid microphone feedback, continuous output from electronic musical instruments or distorted output from any

signal source.

• Do not place the speakers close to uorescent light sources or neon light xtures.

• Although the speakers are magnetically shielded, keep magnetic storage media (disks and tapes) at least four inches from the speaker system in order to avoid

data loss.

• WARNING: To reduce the risk of re or electric shock, do not expose this speaker system to rain or moisture.

• Use only JBL-approved power supplies listed on the product label.

™