EasyManua.ls Logo

JBL Performance Series - User Manual

JBL Performance Series
2 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Loading...
ACOUSTIC & ELECTRICAL SPECIFICATIONS:
Nominal Impedance 8 Ohms
Max Amp Power 100 Watts*
Frequency Response 30Hz – 20kHz (–10dB)
Sensitivity 89dB (2.83V @ 1 meter)
Crossover Frequency 2,400Hz
SYSTEM COMPONENTS:
Grille, Gray 590-0267
Low-Frequency Transducer 8" (203mm) Titanium-laminate
cone w/rubber surround
(590-0282)
DC Resistance 5.4 Ohms, ±10%
High-Frequency Transducer 1" (25mm) Titanium-laminate
dome, w/swivel mount
(590-0284)
DC Resistance 7.4 Ohms, ±10%
Crossover Network 590-0283
AURAL SWEEP TEST SPECIFICATIONS:
System Aural Sweep Test 6.0V Input 30Hz to 20kHz
L.F. Aural Sweep Test 5.0V Input 30Hz to 3kHz
H.F. Aural Sweep Test 2.83V Input 1kHz to 20kHz
PHYSICAL SPECIFICATIONS:
Plate Size (W x H) 10-1/8" x 13-1/8" (257mm x 333mm)
Mounting Cutout Size 8-7/8" x 11-13/16"
(W x H) (225mm x 300mm)
Mounting Depth 4" (102mm)
Weight 15.6 lb/7.0kg (sold in pairs)
WARRANTY:
Refer to Warranty Statement packed with each product.
*
The maximum recommended amplifier power rating will
ensure proper system headroom to allow for occasional
peaks. We do not recommend sustained operation at these
maximum power levels.
Legend on Page 2
8
9
11
10
YEL
BLK
GRN
BLK
+
+
+
+
LOW-FREQUENCY
TRANSDUCER
590-0282
CROSSOVER NETWORK
590-0283
HIGH-FREQUENCY
TRANSDUCER
590-0284
4µf
250V
C1
L1
0.5mH
C2
20µf
100V
L2
0.5mH
R2
7.5 ohms
10 watts
3.9 ohms
5 watts
R1
GRN
.250
BLK
.205
YEL
.110
BLK
.110
L3
0.6mH
C3
25µf
100V
IS8 SCHEMATIC
Technical Manual
IS8 Performance
Series
IS8 Performance
Series
1/07
Harman Consumer Group, Inc., 250 Crossways Park Drive, Woodbury, New York 11797
PACKAGING WIRING DIAGRAM
Question and Answer IconNeed help?

Do you have a question about the JBL Performance Series and is the answer not in the manual?

JBL Performance Series Specifications

General IconGeneral
BrandJBL
ModelPerformance Series
CategorySpeakers
LanguageEnglish

Related product manuals