18
trigger the ducker threshold. Stronger voices may want a higher sensor level. Weaker voices may want a
lower sensor level to trigger the music reduction. A lower value represents a less sensitive signal detection.
i. Select and edit these values by pressing the Master/Menu knob while Sensitivity Parameters is
highlighted.
. Navigate to the respective channel you wish to edit and press the Master/Menu knob to select.
. Adjust the parameter.
. Press the Master/Menu knob to save the adjustment
. Press the BACK button to cancel this adjustment.
ii. Range is a parameter that tells CH7 how much volume should be reduced when signal detection
meets the desired level.
. To adjust this, navigate to RANGE and press the Master/Menu knob.
. Adjust the parameter
. Press the Master/Menu knob to save the adjustment
. Press the BACK button to cancel this adjustment.
iii. Release Time is a parameter that tells CH7 when it should return to normal volume after signal is no
longer detected. This value is represented in ms (milliseconds).
. To adjust this, navigate to RELEASE TIME eld and press the Master/Menu knob.
. Adjust the parameter
. Press the Master/Menu knob to save the adjustment
. Press the BACK button to cancel this adjustment.
To Next Page
Loading...
