JBL SR4726X/F
CAUTION!
Suspending this system should only be done by qualified persons following
safe rigging standards.
Remember: the w
eakest component determines the size and safety of the
entire arr
ay!
CAUTION! Before suspending any array always inspect all
components of the array (enclosure, truss module, threaded fasteners,
connecting hardware, and lifting hardware) for cracks, deformations, corrosion,
missing or damaged parts that could reduce strength and safety of the array.
Use only load rated hardware. Building structural supports and hoist motors
require inspection prior to each use by knowledgeable professionals. Never
exceed maximum recommended load ratings.
In the event that the track has suffered damage, replace only with the correct
part (see below) from JBL professional. Replacement with parts from other
sources may result in suspension failure.
Track 3” fly ware part number 390-00012-00
Track 8” fly ware part number 390-00013-00
The only fitting load-rated for over head use is a SMI (909) 878-9104 part
number SM-61B “L” Double Indexing locking Swivel Ring Fitting or a ATM
(310) 834-5914 part number AMTS-3SF.
JBL SR4726X/F
To Previous Page
Loading...
Need help?
General
