JBL Studio 5 Series - Studio 570 Floorstanding Speaker Specifications; Studio 530 Bookshelf Speaker Specifications

13
www.jbl.com
English
STUDIO 570 FLOORSTANDING SPEAKER
Speaker type: 2-way dual-woofer, floorstanding
Low-frequency transducer:
Two 5-1/4" (130mm) PolyPlas cones with Symmetrical Field Geometry™
magnet structures, cast frames and rubber surrounds, magnetically
shielded
High-frequency transducer:
1" (25mm) compression driver with neodymium magnet and one-piece
Teonex
®
diaphragm on a glass-filled ABS Bi-Radial
®
horn, magnetically
shielded
Recommended amplifier power: 150 watts
Frequency response: 45Hz – 40kHz (–6dB)
Nominal impedance: 6 ohms
Sensitivity (2.83V/1m): 88dB
Crossover frequencies: 1.5kHz
Enclosure type: Ported
Connector type: Dual gold-plated binding posts (bi-wire capable)
Available finishes: Black or cherry
Dimensions (H x W x D):
34-1/16" x 8-7/16" x 11-3/16"
(896mm x 214mm x 284mm)
Weight: 34.4 lb (15.6kg)
STUDIO 530 BOOKSHELF SPEAKER
Speaker type: 2-way bookshelf
Low-frequency transducer:
5-1/4" (130mm) PolyPlas cone with Symmetrical Field Geometry™
magnet structure, cast frame and rubber surround, magnetically
shielded
High-frequency transducer:
1" (25mm) compression driver with neodymium magnet and one-
piece Teonex
®
diaphragm on a glass-filled ABS Bi-Radial
®
horn,
magnetically shielded
Recommended amplifier power: 125 watts
Frequency response: 45Hz – 40kHz (–6dB)
Nominal impedance: 6 ohms
Sensitivity (2.83V/1m): 86dB
Crossover frequencies: 1.5kHz
Enclosure type: Ported
Connector type: Dual gold-plated binding posts (bi-wire capable)
Available finishes: Black or cherry
Dimensions (H x W x D):
18-3/8" x 8-7/16" x 8-3/4"
(467mm x 214mm x 222mm)
Weight: 17 lb (7.7kg)