JBL Studio 590 - SPECIFICATIONS; STUDIO 590 FLOORSTANDING SPEAKER; STUDIO 580 FLOORSTANDING SPEAKER

12
SPECIFICATIONS
STUDIO 590 FLOORSTANDING SPEAKER
Speaker type: 2-1/2-way dual-woofer, floorstanding
Low-frequency transducer:
Two 8" (200mm) PolyPlas™ cones with Symmetrical Field Geometry™
magnet structures, cast frames and rubber surrounds, magnetically
shielded
High-frequency transducer:
1" (25mm) compression driver with neodymium magnet and one-piece
Teonex
®
diaphragm on a glass-filled ABS Bi-Radial
®
horn, magnetically
shielded
Recommended amplifier power: 250 watts
Frequency response: 35Hz – 40kHz (–6dB)
Nominal impedance: 6 ohms
Sensitivity (2.83V/1m): 92dB
Crossover frequencies: 1.5kHz
Enclosure type: Ported
Connector type: Dual gold-plated binding posts (bi-wire capable)
Available finishes: Black or cherry
Dimensions (H x W x D):
49-3/4" x 12-11/16" x 16-1/4"
(1263mm x 322mm x 413mm)
Weight: 69.5 lb (31.5kg)
STUDIO 580 FLOORSTANDING SPEAKER
Speaker type: 2-way dual-woofer, floorstanding
Low-frequency transducer:
Two 6-1/2" (165mm) PolyPlas cones with Symmetrical Field Geometry™
magnet structures, cast frames and rubber surrounds, magnetically
shielded
High-frequency transducer:
1" (25mm) compression driver with neodymium magnet and one-piece
Teonex
®
diaphragm on a glass-filled ABS Bi-Radial
®
horn, magnetically
shielded
Recommended amplifier power: 200 watts
Frequency response: 40Hz – 40kHz (–6dB)
Nominal impedance: 6 ohms
Sensitivity (2.83V/1m): 90dB
Crossover frequencies: 1.5kHz
Enclosure type: Ported
Connector type: Dual gold-plated binding posts (bi-wire capable)
Available finishes: Black or cherry
Dimensions (H x W x D):
42-1/16" x 9-7/8" x 13-3/4"
(1069mm x 250mm x 348mm)
Weight: 49 lb (22.2kg)