JBL SYNTHESIS S3-SPP User Manual

2.1 Introduction
Congratulations on your purchase of JBL’s
Synthesis Three S3-SPP Signal Processing
Package. This product has been designed and
built with careful attention to sound quality and
aesthetics, and should certainly enhance your lis-
tening experience. It is suggested that this com-
ponent be fully utilized with the Synthesis Three
Home Theater system, but it can be used with
any Home THX
®
system or other home theater
speaker package. The S3-SPP boasts the follow-
ing features:
2.2 Features
• 3 Channel Graphic Equalizers for Left, Center,
and Right Channels at 1/3 octave spacing,
allowing for precise frequency control and
contouring
• Mono Subwoofer Graphic Equalizer with 1/6
octave spacing for fine tuning of the low
frequencies
• Electronically switchable screen boost controls
for Left, Center, and Right channels to compen-
sate for mounting speakers behind perforated
screens
• High Frequency Contour controls for the front
channels that improves frequency response
• Bypass control to remove equalization from
signal path to allow for direct unmodified
audiophile listening
• Ground lift switch that helps to eliminate
annoying 50/60 cycle hum and noise caused by
ground loops
• Removable security panel to prevent accidental
adjustment of the controls
• Removable ears for 19” standard rack mounting
2.0
SYNTHESIS THREE
SIGNAL PROCESSING
PACKAGE (S3-SPP)
4

JBL SYNTHESIS S3-SPP Specifications

General

Brand	JBL
Model	SYNTHESIS S3-SPP
Category	Stereo Equalizer
Language	English