www.jbstools.com
4
IMPORTANT SAFETY
WARNINGS
DO NOT operate the Lift Table unless you are familiar with it and have been trained or authorised
to do so
DO NOT allow other people to stand in front or behind the lift table when it is in motion
DO NOT transport loads on an uneven surface
DO NOT transport loads in the raised position
DO NOT handle unstable or loosely stacked loads
NEVER place any part of your body in the scissor mechanism or under the load. Keep clear when
lowering load
DO NOT allow people to sit or ride on the Lift Table
DO NOT put your foot in front of the rolling wheels
NEVER overload the Lift Table beyond its rated capacity
DO NOT use the Lift Table on a sloped or inclined surface
DO NOT operate a Lift Table that has been deemed unsafe after inspection/service
DO NOT modify the Lift Table
ALWAYS visually inspect the Lift Table for damage or faults before use; especially the wheels,
handle assembly, platform and lowering control
DO read and understand the instruction manual
SQUEEZE the valve handle slowly to allow load to descend in a cautious manner
ALWAYS secure the load before raising, lowering or moving the Lift Table
OPERATE the Lift Table on a level, flat harden surface
DO practice maintenance work according to the instruction manual
ONLY use the Lift Table under dry conditions, the Lift Table is not water resistant
WATCH the condition of the load when operating to prevent the load becoming unstable
To Next Page
Loading...