What to do if the red torque warning light illuminates and alarm sounds in JBT Farm Equipment?
If the red torque warning light illuminates and an alarm sounds, it means the towing operation has exceeded a level that could damage the aircraft nose landing gear. The light and alarm will remain active, and all tractor movement will be disabled until the Aircraft Protection System is reset.
What to do if the yellow torque caution light illuminates and alarm sounds in JBT LEKTRO 8850SDA?
If the yellow torque caution light illuminates and an alarm sounds, the towing operation exceeds the configured maximum safe torque for the aircraft being towed. You may continue the towing operation, but be cautious to avoid high-torque maneuvers.
What to do if alarm sounds three times every 10 seconds in JBT Farm Equipment?
If an alarm sounds three times every 10 seconds, the system has lost communications with the Torque Cell in the Turntable. You may continue using the tractor, but all limits on acceleration, braking, Winch force, and Cradle heights are disabled.
What does it mean if the green zero light is flashing on JBT LEKTRO 8850SDA Farm Equipment?
If the green zero light is flashing, the system has lost communications with both of the Load Pins mounted near the Lift Cylinders. You may continue using the tractor, but all limits on acceleration, braking, Winch force, and Cradle heights are disabled.
What to do if flashing APS level buttons and green zero light appear in JBT Farm Equipment?
If flashing APS Level Buttons and a Green Zero Light are visible, the system has detected a weight outside the parameters of any programmed levels. You may continue using the tractor, but all limits on acceleration, braking, Winch force, and Cradle heights are disabled.
Details general safety precautions, responsibilities, and critical safety steps.
Details the operator and passenger stations, consoles, and seats.
Describes the cradle, winch, gates, and adapters for aircraft securing.
Explains the parking and emergency brake systems.
Details optional aircraft protection and GPU systems.
Outlines the critical safety inspection procedure before operating the tractor.
Covers essential emergency operations like brake release and aircraft release.
Guides on operating and troubleshooting aircraft protection and GPU systems.
Explains how to drive the tractor, control speed, steer, and use controls.
Details methods of stopping the tractor, including plug braking and emergency braking.
Lists specific items to check during the pre-use safety inspection.
General| Brand | JBT |
|---|---|
| Model | LEKTRO 8850SDA |
| Category | Farm Equipment |
| Language | English |
To Next Page
