What to do if the red torque warning light illuminates and alarm sounds in JBT Farm Equipment?
If the red torque warning light illuminates and an alarm sounds, it means the towing operation has exceeded a level that could damage the aircraft nose landing gear. The light and alarm will remain active, and all tractor movement will be disabled until the Aircraft Protection System is reset.
What to do if the yellow torque caution light illuminates and alarm sounds in JBT LEKTRO 8950SDB Farm Equipment?
If the yellow torque caution light illuminates and an alarm sounds, the towing operation exceeds the configured maximum safe torque for the aircraft being towed. You may continue the towing operation, but be cautious to avoid high-torque maneuvers.
What to do if alarm sounds three times every 10 seconds in JBT Farm Equipment?
If an alarm sounds three times every 10 seconds, the system has lost communications with the Torque Cell in the Turntable. You may continue using the tractor, but all limits on acceleration, braking, Winch force, and Cradle heights are disabled.
What does it mean if the green zero light is flashing on JBT Farm Equipment?
If the green zero light is flashing, the system has lost communications with both of the Load Pins mounted near the Lift Cylinders. You may continue using the tractor, but all limits on acceleration, braking, Winch force, and Cradle heights are disabled.
What to do if flashing APS level buttons and green zero light appear in JBT LEKTRO 8950SDB Farm Equipment?
If flashing APS Level Buttons and a Green Zero Light are visible, the system has detected a weight outside the parameters of any programmed levels. You may continue using the tractor, but all limits on acceleration, braking, Winch force, and Cradle heights are disabled.
Details features, specifications, and layout of the LEKTRO 8800SDA tractor.
Details features, specifications, and layout of the LEKTRO 8800SDA-EZ tractor.
Details features, specifications, and layout of the LEKTRO 8850SDA-EZ tractor.
Details features, specifications, and layout of the LEKTRO 8850SDA tractor.
Details features, specifications, and layout of the LEKTRO 8850SDA-AL-100.
Details features, specifications, and layout of the LEKTRO 8850SDA-M tractor.
Details features, specifications, and layout of the LEKTRO 8900SDB tractor.
Details features, specifications, and layout of the LEKTRO 8950SDB tractor.
Outlines mandatory pre-use safety checks for tractor operators.
Covers emergency brake release, cradle lowering, aircraft release, and towing.
Provides instructions on operating the tractor, including steering and speed controls.
Details vehicle stopping methods including gradual, plug, and emergency braking.
Lists items and instructions for daily safety inspection of tractor components.
General| Drive | 4-Wheel Drive |
|---|---|
| Power Source | Battery |
| Type | Electric |
| Operator Environment | Open |
| Model | LEKTRO 8950SDB |
To Next Page
