jcb 0960 - Specification

Specification
Name
specification
Battery
Motor
Suitable age
Max weight
Body size
Speed
Hours of use
Charger
Main material
3+ years
30KG
2.5-4.5KM/h
charging 8-12 hours，using 1 to 2 hours
Input: 100-240V AC
PP(polypropylene) and iron
Output: DC 12V500mA / DC 12V1000mA/
DC 15V500mA / DC 15V1000mA
*The above parameters contain optional features, specific parameters
please refer to our samples.
A: 1930*605*980MM; B:1930*605*585MM
DC 12V*2
1
Damage to the battery may occur if it is allowed to drain
completely. Do not allow the battery to drain completely.
Check the battery and charger (supply cord, connector) for wear
and damage before charging. Do not charge the battery if damage has
occurred.
It can be fully charged within 12 hours.
Do not charge the battery for more than 20 hours. Failure to charge the
battery as directed could cause permanent damage to the battery and
void the warranty.
Only an adult who has read and understands the safety warnings should
handle, charge and recharge the battery.
12V4.5Ah*1 / 12V7Ah*1/ 12V10Ah*1
A(M8 Spanner)
B(Wheel Cover)
C1(Front Wheel)
D(Rear axle)
4
2
F(Bucket arm support frame)
G (Bucket arm L)
H(Bucket arm R)
1
20
J(4*16 self-tapping screw)
1
I(Bucket arm support
frame bottom parts)
K(Bucket)
2
1
1
2 2
C2(Rear Wheel)
2
L(4*12 with washer screws)